Description

Applicable on Cisco Nexus 7000 and 5000 series devices. Monitors the basic parameters like CPU utilization, Memory utilization, uptime and also monitors the FRU status parameters like fan, module and power status and also it monitors the VDC status.

Prerequisites

SNMP should be enabled in end device and device should support CISCO-ENTITY-FRU-CONTROL-MIB, CISCO-VDC-MIB, CISCO-SYSTEM-EXT-MIB OIDs and SNMP credentials should be attached against the device in portal.

How to Apply: This template is All instance selection based. It will not ask user to select any instance (s) while assigning it to a device.

Metric Parameters

Metric Parameters
ParameterDescription
Frequency
  • Frequency is the interval in which you want to probe and collect metric data from the target device/resource
  • Frequency is defined in minutes (min).
  • Warning ThresholdIf the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user.
    Critical ThresholdIf the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user.
    AlertThe alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user.

    Metrics

    cisco.fru.module.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.9.9.117.1.2.1.1.2
    ExpressionNULL
    DescriptionFRU Module Status. Possible status values are 1 -Unknown, 2 -OK, 3 -Disabled, 4 -OK, but diagnostics failed, 5 -Boot, 6 -Selftest, 7 -Failed, 8 -Missing, 9 -Mismatch with parent, 10 -Mismatch config, 11 -Diagnostics failed, 12 -Dormant, 13 -Out of service admin, 14 -Out of service env temp, 15 -Powered down, 16 -Powered up, 17 -Power denied, 18 -Power cycled, 19 -OK, but power over warning, 20 -OK, but power over critical, 21 -Sync in progress, 22 -Upgrading, 23 -OK, but authfailed.
    [OIDs: 1.3.6.1.4.1.9.9.117.1.2.1.1.2, 1.3.6.1.2.1.47.1.1.1.1.2]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameFRU Module Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold4,5,10,11,13,14,17,19,23,271-27
    Warning Repeat Count11-12
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold7,8,9,201-27
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    FRU Module Status

    FRU Module Status

    cisco.fru.power.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.9.9.117.1.1.2.1.2
    ExpressionNULL
    DescriptionFRU Power Status. 1 -FRU powered off, 2 -FRU powered on, 3 -FRU power off by admin, 4 -FRU powered off-denied, 5 -FRU powered off-environment issue, 6 -FRU powered off temperature problem, 7 -FRU powered off - fan problem, 8 -FRU powered off - failed, 9 -
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameFRU Power Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorNOT_IN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold2,31-12
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    FRU Power Status

    FRU Power Status

    cisco.fru.fan.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.9.9.117.1.4.1.1.1
    ExpressionNULL
    DescriptionFRU Fan Status. Possible status values are 1 -Unknown, 2 -Up, 3 -Down, 4 -Warning. Alerts if fan status in 3(Down) or 4(Warning) [OIDs: 1.3.6.1.4.1.9.9.117.1.4.1.1.1, 1.3.6.1.2.1.47.1.1.1.1.2]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameFRU Fan Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold41-4
    Warning Repeat Count11-12
    Critical OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold31-4
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    FRU Fan Status

    FRU Fan Status

    nexus.vdc

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.9.9.774.1.1.1.3, 1.3.6.1.4.1.9.9.774.1.1.1.5, 1.3.6.1.4.1.9.9.774.1.1.1.6
    ExpressionciscoVdcState
    DescriptionCurrent operational state of the virtual device. Possible values are 1=Active, 2=Suspended, 3=NonConfigured, 4=Configured, 5=Creating, 6=Deleting, 7=Failed, 8=Pending, 9=Updating, 10=Restarting, 11=Suspending, 12=Resuming, 13=Failing. [OIDs: 1.3.6.1.4.1.9.9.774.1.1.1.2, 1.3.6.1.4.1.9.9.774.1.1.1.3]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameVirtual Device Context(VDC) status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold2,31-13
    Warning Repeat Count11-12
    Critical OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold51-13
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    Nexus VDC

    Nexus VDC

    nexus.cpu.utilization

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.9.9.305.1.1.1.0
    ExpressionNULL
    DescriptionThe average utilization of CPU on the active supervisor. [OID - 1.3.6.1.4.1.9.9.305.1.1.1]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco System Performance - CISCO-SYSTEM-EXT-MIB
    Unit%

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    Filter
    Warning OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold850-100
    Warning Repeat Count21-12
    Critical OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold900-100
    Critical Repeat Count21-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    Nexus CPU Utilization New

    Nexus CPU Utilization New

    nexus.memory.utilization

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.9.9.305.1.1.2.0
    ExpressionNULL
    DescriptionThe average utilization of memory on the active supervisor. [OID - 1.3.6.1.4.1.9.9.305.1.1.2.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco System Performance - CISCO-SYSTEM-EXT-MIB
    Unit%

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    Filter
    Warning OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold850-100
    Warning Repeat Count21-12
    Critical OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold900-100
    Critical Repeat Count21-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    Nexus Memory Utilization New

    Nexus Memory Utilization New

    system.uptime

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.9.9.305.1.1.10.0
    ExpressionNULL
    DescriptionThe time (in seconds) since the entire system was last re-initialized as a result of reload. [CISCO-SYSTEM-EXT-MIB] - cseSysUpTime(1.3.6.1.4.1.9.9.305.1.1.10)
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco System Performance - CISCO-SYSTEM-EXT-MIB
    Units

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorLESS_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold18000-4294967295
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    Uptime

    Uptime

    nexus.vdc.resource.usage

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.9.9.774.1.4.1.1.7, 1.3.6.1.4.1.9.9.774.1.4.1.1.3, 1.3.6.1.4.1.9.9.774.1.4.1.1.5
    Expression(ciscoVdcGlobalResUsed / ciscoVdcGlobalResTotal) * 100
    DescriptionMonitors the utilization of VDC resource. [1.3.6.1.4.1.9.9.774.1.4.1.1.3, 1.3.6.1.4.1.9.9.774.1.4.1.1.7]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameVirtual Device Context(VDC) Resource Usage - Across all VDCs
    Unit%

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold700-100
    Warning Repeat Count11-12
    Critical OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold800-100
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    VDC Resource Usage

    VDC Resource Usage

    cisco.fru.total.availablecurrent

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.9.9.117.1.1.1.1.3
    ExpressionNULL
    DescriptionTotal current available for FRU usage. [OID: 1.3.6.1.4.1.9.9.117.1.1.1.1.3]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco FRU Power Supply Group
    Unitamps

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Note: As Alert is not enabled on the above metric, the fields are left blank.

    Sample Output

    FRU Total Available Current

    FRU Total Available Current

    cisco.fru.total.drawncurrent

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.9.9.117.1.1.1.1.4
    ExpressionNULL
    DescriptionTotal current drawn by powered-on FRUs. [OID: 1.3.6.1.4.1.9.9.117.1.1.1.1.4]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco FRU Power Supply Group
    Unitamps

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Note: As Alert is not enabled on the above metric, the fields are left blank.

    Sample Output

    FRU Total Drawn Current

    FRU Total Drawn Current