Description

Monitors Cisco Wireless LAN Controller(WLC)’s CPU utilization, memory utilization, temperature, power supplies state, number of connected APs, maximum clients present on WLC; AP profiles(load, interference, coverage, noise) state; AP RRM performance parameters like connected clients count, Load channel utilization.

Prerequisites

SNMP should be enabled in end device and device should support AIRESPACE-SWITCHING-MIB, AIRESPACE-WIRELESS-MIB OIDs and SNMP credentials should be attached against the device in portal.

How to Apply: This template is All instance selection based. It will not ask user to select any instance (s) while assigning it to a device.

Metric Parameters

Metric Parameters
ParameterDescription
Frequency
  • Frequency is the interval in which you want to probe and collect metric data from the target device/resource
  • Frequency is defined in minutes (min).
  • Warning ThresholdIf the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user.
    Critical ThresholdIf the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user.
    AlertThe alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user.

    Metrics

    system.uptime

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.2.1.1.3.0
    ExpressionsysUpTime/100
    DescriptionThe time since the SNMP agent in the system was last re-initialized.[OID : 1.3.6.1.2.1.1.3.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameSystem Uptime
    Units

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorLESS_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold18000-4294967295
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    UPTIME

    UPTIME

    cisco.wlc.agent.cpu.util

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.14179.1.1.5.1.0
    ExpressionNULL
    DescriptionProvides the current CPU load of the switch in percentage. [OID: 1.3.6.1.4.1.14179.1.1.5.1.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco WLC Monitoring
    Unit%

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold800-100
    Warning Repeat Count21-12
    Critical OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold900-100
    Critical Repeat Count21-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    CPU Utilization

    CPU Utilization

    cisco.wlc.agent.memory.util

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.14179.1.1.5.2.0, 1.3.6.1.4.1.14179.1.1.5.3.0
    Expression((agentTotalMemory - agentFreeMemory) / agentTotalMemory) * 100
    DescriptionProvides the current memory utilization of the switch in percentage. [OID: 1.3.6.1.4.1.14179.1.1.5.2.0, 1.3.6.1.4.1.14179.1.1.5.3.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco WLC Monitoring
    Unit%

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold800-100
    Warning Repeat Count11-12
    Critical OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold900-100
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    Memory Utilization

    Memory Utilization

    cisco.wlc.temperature

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.14179.2.3.1.13.0
    ExpressionNULL
    DescriptionProvides the current Internal temperature of the unit in centigrade [OID: 1.3.6.1.4.1.14179.2.3.1.13.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco WLC Monitoring
    UnitC

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning OperatorGREATER_THANEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold400-2147483647
    Warning Repeat Count11-12
    Critical OperatorOUT_OF_RANGEEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold0,500-2147483647
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    WLC temperature

    WLC temperature

    cisco.wlc.aps.count

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.9.9.618.1.8.4.0
    ExpressionNULL
    DescriptionSpecifies the count of AP's that are connected with WLC. [OID: 1.3.6.1.4.1.9.9.618.1.8.4.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco WLC Monitoring
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Note: As Alert is not enabled on the above metric, the fields are left blank.

    Sample Output

    WLC Connected APs Count

    WLC Connected APs Count

    cisco.wlc.clients.count

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.9.9.618.1.8.12.0
    ExpressionNULL
    DescriptionProvides the maximum clients present on the controller. [OID: 1.3.6.1.4.1.9.9.618.1.8.12.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco WLC Monitoring
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Note: As Alert is not enabled on the above metric, the fields are left blank.

    Sample Output

    WLC Maximum Clients

    WLC Maximum Clients

    cisco.wlc.powersupply1.operationalstate

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.14179.1.1.3.2.0, 1.3.6.1.4.1.14179.1.1.3.3.0
    Expressionif (agentSwitchInfoPowerSupply1Present == 1, agentSwitchInfoPowerSupply1Operational,-1)
    DescriptionMonitors if the switch has power supply 1 then it provides its operational state.This is applicable to the 4200 series and will always return true for the earlier device versions. Possible values are 0- false, 1- true.
    [OIDs: 1.3.6.1.4.1.14179.1.1.3.2.0, 1.3.6.1.4.1.14179.1.1.3.3.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco WLC Monitoring
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold0-1 to 1
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    Power Supply1 Operational State

    Power Supply1 Operational State

    cisco.wlc.powersupply2.operationalstate

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.14179.1.1.3.4.0, 1.3.6.1.4.1.14179.1.1.3.5.0
    Expressionif (agentSwitchInfoPowerSupply2Present == 1, agentSwitchInfoPowerSupply2Operational, -1)
    DescriptionMonitors if the switch has power supply 2 then it provides its operational state.This is applicable to the 4200 series and will always return true for the earlier device versions. Possible values are 0- false, 1- true. [OIDs: 1.3.6.1.4.1.14179.1.1.3.4.0, 1.3.6.1.4.1.14179.1.1.3.5.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco WLC Monitoring
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold0-1 to 1
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    Power Supply2 Operational State

    Power Supply2 Operational State

    wap.cisco.bsnap.ifload.channel.util

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.14179.2.2.13.1.3
    ExpressionNULL
    DescriptionMonitors the AP channel utilization [OID: 1.3.6.1.4.1.14179.2.2.13.1.3]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco WLC BSN AP RRM Performance
    Unit%

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold800-100
    Warning Repeat Count11-12
    Critical OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold900-100
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    AP Load Channel Utilization

    AP Load Channel Utilization

    wap.cisco.bsnap.load.client.count

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.14179.2.2.13.1.4
    ExpressionNULL
    DescriptionIndicates the number of clients attached to this Airespace AP at the last measurement interval (This comes from APF) [OID: 1.3.6.1.4.1.14179.2.2.13.1.4]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco WLC BSN AP RRM Performance
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Note: As Alert is not enabled on the above metric, the fields are left blank.

    Sample Output

    Number of clients Connected

    Number of clients Connected

    wap.cisco.bsnap.coverage.profilestate

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.14179.2.2.16.1.24
    ExpressionNULL
    DescriptionIt represents the current state of coverage monitor. This is a total measurement of the client coverage at this Airespace AP. Possible values are 0- Fail : Indicates the Airspace AP is not performing adequately against the coverage profile, 1- PASS indicates that this Airespace AP is performing adequately compared to the coverage profile. [OID: 1.3.6.1.4.1.14179.2.2.16.1.24]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco WLC BSN AP Profiles Monitoring
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold00, 1
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    AP Coverage Profile State

    AP Coverage Profile State

    wap.cisco.bsnap.interference.profilestate

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.14179.2.2.16.1.2
    ExpressionNULL
    DescriptionMonitors the current state of Interference monitor. This is a total measurement of the interference present at this Airespace AP. Possible values are 0- Fail : Indicates the Airespace AP is not performing adequately against the Interference profile. 1- Pass : Indicates that this Airespace AP is performing adequately compared to the Interference profile.[OID: 1.3.6.1.4.1.14179.2.2.16.1.2]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco WLC BSN AP Profiles Monitoring
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold00, 1
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    Interference Profile State

    Interference Profile State

    wap.cisco.bsnap.loadprofile.state

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.14179.2.2.16.1.1
    ExpressionNULL
    DescriptionMonitors the current state of the load monitor. This is a total measurement of the business of this Airespace AP. Possible values are 0- Fail : Indicates the Airespace AP is not performing adequately against the LOAD profile, 1- Pass: indicates that this Airespace AP is performing adequately compared to the Airespace AP profile.
    [OID: 1.3.6.1.4.1.14179.2.2.16.1.1]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco WLC BSN AP Profiles Monitoring
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold00, 1
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    Load Profile State

    Load Profile State

    wap.cisco.bsnap.noise.profilestate

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.14179.2.2.16.1.3
    ExpressionNULL
    DescriptionThis field represents the current state of Noise monitor. This is a total measurement of the noise present at this Airespace AP. Possible values are 0- Fail : Indicates the Airespace AP is not performing adequately against the noise profile, 1- Pass: Indicates that this Airespace AP is performing adequately compared to the noise profile. [OID: 1.3.6.1.4.1.14179.2.2.16.1.3]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameCisco WLC BSN AP Profiles Monitoring
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold00, 1
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    Noise Profile State

    Noise Profile State