Description

Monitoring Template for HP Procurve switches. Monitors memory usage, CPU utilization, System temperature, chassis sensor status, power supply state, power supply temperature, fan status and uptime.

Prerequisites

SNMP should be enabled in end device and device should support STATISTICS-MIB.mib, NETSWITCH-MIB.mib, HP-ICF-CHASSIS.mib, POWERSUPPLY-MIB.mib, FAN-MIB.mib OIDs and SNMP credentials should be attached against the device in portal.

How to Apply: This template is All instance selection based and Automatic select instance based. It will not ask user to select any instance (s) while assigning it to a device.

Metric Parameters

Metric Parameters
ParameterDescription
Frequency
  • Frequency is the interval in which you want to probe and collect metric data from the target device/resource
  • Frequency is defined in minutes (min).
    • Warning ThresholdIf the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user.
    Critical ThresholdIf the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user.
    AlertThe alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user.

    Metrics

    system.uptime

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.2.1.1.3.0
    ExpressionsysUpTime/100
    DescriptionThe time since the SNMP agent in the system was last re-initialized.[OID : 1.3.6.1.2.1.1.3.0]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameSystem Uptime
    Units

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    Filter
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorLESS_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold18000 - 4294967295
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    Uptime

    Uptime

    system.cpu.utilization

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.11.2.14.11.5.1.9.6.1.0
    ExpressionNULL
    DescriptionIt represents the HP ProCurve CPU Utilization
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameHP Procurve CPU Utilization
    Unit%

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    Filter
    Warning OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold800-100
    Warning Repeat Count21-12
    Critical OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold900-100
    Critical Repeat Count21-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    system.memory.util.percent

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.11.2.14.11.5.1.1.2.2.1.1.5, 1.3.6.1.4.1.11.2.14.11.5.1.1.2.2.1.1.6, 1.3.6.1.4.1.11.2.14.11.5.1.1.2.2.1.1.7
    Expression(hpGlobalMemAllocBytes / hpGlobalMemTotalBytes) * 100
    DescriptionThe system dynamic memory utilization, in unit of percentage. Memory Utilization is the percent of memory used in comparison to the total memory bytes and used memory bytes.
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameHP Procurve Global Memory Utilization
    Unit%

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold800-100
    Warning Repeat Count21-12
    Critical OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold900-100
    Critical Repeat Count21-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    hp.procurve.sensor.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.11.2.14.11.1.2.6.1.3, 1.3.6.1.4.1.11.2.14.11.1.2.6.1.4
    ExpressionhpicfSensorStatus
    DescriptionActual status indicated by the HP Procurve sensor. These are the possible sensor values(1: Unknown 2: Bad 3: Warning 4: Good 5: NotPresent).
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameHP Procurve Sensor Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold1,31-5
    Warning Repeat Count11-12
    Critical OperatorEQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold21-5
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    system.temperature

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.11.2.14.11.1.2.8.1.1.3.0, 1.3.6.1.4.1.11.2.14.11.1.2.8.1.1.2.0
    ExpressionPARSER(hpSystemAirCurrentTemp,'{1}','(d+(.d+)*)C')
    DescriptionIt monitors the system temperature of HP Switches which support the HP-ICF-CHASSIS-MIB.
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameHP ProCurve System Temperature
    UnitC

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    Filter
    Warning OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold400 - 2147483647
    Warning Repeat Count11-12
    Critical OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold450 - 2147483647
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    module.status

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.11.2.14.11.1.2.3.1.4
    ExpressionNULL
    DescriptionModule status: A textual description of the card plugged into this slot in this chassis, including the product number and version information. Specifically, hpicfSlotDesc (1.3.6.1.4.1.11.2.14.11.1.2.3.1.4) will throw three possible values back: #1. A description of the module installed in the slot.
    (Example: "HP J9534A 24p Gig-T PoE+ v2 zl Module") #2. An empty slot description ("Slot Available") #3. A failure message ("Module Failed") for a failed, non-empty slot. Alert will generate on #3 condition(i.e "Module Failed").
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameHP ICF Chassis Module Status
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorREGEX_MATCHESEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold"*Module Failed"*
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)NoYes/No

    Sample Output

    No graph

    hp.icf.fan.state

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.11.2.14.11.5.1.54.2.1.1.4, 1.3.6.1.4.1.11.2.14.11.5.1.54.2.1.1.2, 1.3.6.1.4.1.11.2.14.11.5.1.54.2.1.1.3
    ExpressionhpicfFanState
    DescriptionThe current state of the HP Switch fan. [OID: 1.3.6.1.4.1.11.2.14.11.5.1.54.2.1.1.4]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameHP ICF Fan
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorNOT_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold50-6
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    hp.icf.ps.state

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.2, 1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.5, 1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.6
    ExpressionhpicfPsState
    DescriptionThe physical state of the switch power supply entity. [OID: 1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.2]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameHP ICF Power Supply
    Unit

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterhpicfPsState != 1
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical OperatorIN_LISTEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold4,5,61-6
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    hp.icf.ps.temperature

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.4
    ExpressionNULL
    DescriptionThe temperature of the power supply in Celsius. [OID: 1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.4]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameHP ICF Power Supply
    UnitCelsius

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency51 – 1440 (mins)
    FilterhpicfPsState != 1
    Warning OperatorGREATER_THANEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold500 - 2147483647
    Warning Repeat Count11-12
    Critical OperatorGREATER_THANEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold550 - 2147483647
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph