Description

This template is applicable for Juniper SRX devices. Monitors SPU utilization, memory utilization, flow/PFE sessions utilization, CP sessions utilization, interface NAT port utilization and source-nat port utilization.

Prerequisites

SNMP should be enabled in end device and device should support JUNIPER-MIB OIDs and SNMP credentials should be attached against the device in portal.

How to Apply: This template is All instance selection based. It will not ask user to select any instance(s) while assigning it to a device.

Metric Parameters

Metric Parameters
ParameterDescription
Frequency
  • Frequency is the interval in which you want to probe and collect metric data from the target device/resource
  • Frequency is defined in minutes (min).
    • Warning ThresholdIf the metric value satisfies the condition defined along with Warning Threshold value, then a notification is sent to the user.
    Critical ThresholdIf the metric value satisfies the condition defined along with Critical Threshold value, then a notification is sent to the user.
    AlertThe alert value can be set to either Yes or No. If it is Yes, then an alert message is sent to the user.

    Metrics

    juniper.srx.spu.utilization

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.2636.3.39.1.12.1.1.1.4
    ExpressionNULL
    DescriptionRepresents the current SPU Usage of Packet Forwarding Engine(PFE).
    [OIDs: 1.3.6.1.4.1.2636.3.39.1.12.1.1.1.11, 1.3.6.1.4.1.2636.3.39.1.12.1.1.1.4]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameJuniper SRX SPUs Utilization Statistics
    Unit%

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorGREATER_THANEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold800-100
    Warning Repeat Count11-12
    Critical OperatorGREATER_THANEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold950-100
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    juniper.srx.spu.memory.util

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.2636.3.39.1.12.1.1.1.5
    ExpressionNULL
    DescriptionRepresents Packet Forwarding memory usage. [OIDs: 1.3.6.1.4.1.2636.3.39.1.12.1.1.1.11, 1.3.6.1.4.1.2636.3.39.1.12.1.1.1.5]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameJuniper SRX SPUs Utilization Statistics
    Unit%

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorGREATER_THANEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold800-100
    Warning Repeat Count11-12
    Critical OperatorGREATER_THANEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold950-100
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    juniper.srx.cpsession.usage

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.2636.3.39.1.12.1.1.1.8,
    1.3.6.1.4.1.2636.3.39.1.12.1.1.1.9
    Expression(jnxJsSPUMonitoringCurrentCPSession/jnxJsSPUMonitoringMaxCPSession) * 100
    DescriptionRepresents the current central point (CP) session utilization of services processing unit (SPU).
    OIDs: [1.3.6.1.4.1.2636.3.39.1.12.1.1.1.8, 1.3.6.1.4.1.2636.3.39.1.12.1.1.1.9, 1.3.6.1.4.1.2636.3.39.1.12.1.1.1.11]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameJuniper SRX SPUs Utilization Statistics
    Unit%

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold800-100
    Warning Repeat Count11-12
    Critical OperatorGREATER_THANEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold900-100
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    juniper.srx.flowsession.usage

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.2636.3.39.1.12.1.1.1.7,
    1.3.6.1.4.1.2636.3.39.1.12.1.1.1.6
    Expression(jnxJsSPUMonitoringCurrentFlowSession/jnxJsSPUMonitoringMaxFlowSession) * 100
    DescriptionMonitors the current flow sessions utilization of services processing unit (SPU)
    [OIDs: 1.3.6.1.4.1.2636.3.39.1.12.1.1.1.7, 1.3.6.1.4.1.2636.3.39.1.12.1.1.1.6, 1.3.6.1.4.1.2636.3.39.1.12.1.1.1.11]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameJuniper SRX SPUs Utilization Statistics
    Unit%

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold800-100
    Warning Repeat Count11-12
    Critical OperatorGREATER_THANEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold900-100
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    juniper.srx.nat.singleport.usage

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.2636.3.39.1.7.1.1.3.1.2,
    1.3.6.1.4.1.2636.3.39.1.7.1.1.3.1.3
    Expression(jnxJsNatIfSrcPoolAllocSinglePorts/jnxJsNatIfSrcPoolTotalSinglePorts)*100
    DescriptionAmount of Single Ports per Overload Pool in use when using Interface Nat translation.
    [OIDs: 1.3.6.1.4.1.2636.3.39.1.7.1.1.3.1.2, 1.3.6.1.4.1.2636.3.39.1.7.1.1.3.1.3]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameJuniper SRX Interface NAT Port Usage
    Unit%

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold800-100
    Warning Repeat Count11-12
    Critical OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold990-100
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    juniper.srx.nat.twinports.usage

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.2636.3.39.1.7.1.1.3.1.4,
    1.3.6.1.4.1.2636.3.39.1.7.1.1.3.1.5
    Expression(jnxJsNatIfSrcPoolAllocTwinPorts/jnxJsNatIfSrcPoolTotalTwinPorts) * 100
    DescriptionRepresents Twin Ports per Overload Pool in use when using Interface Nat translation.
    [OIDs: 1.3.6.1.4.1.2636.3.39.1.7.1.1.3.1.4, 1.3.6.1.4.1.2636.3.39.1.7.1.1.3.1.5]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameJuniper SRX Interface NAT Port Usage
    Unit%

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Warning Threshold800-100
    Warning Repeat Count11-12
    Critical OperatorGREATER_THAN_EQUALEnds with, ==, !=, >=, <=, >, <, In Range, Out of range, Equals, Not equals, Equals Ignore Case, Not Equals Ignore Case, Contains, Not contains, Regex match, Regex no match, In string list, Not in string list, In List, Not in list, Starts with
    Critical Threshold990-100
    Critical Repeat Count11-12
    AlertYesYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph

    juniper.srx.sourcenat.port.usage

    Metric Details

    Metric Details
    Applicable forDevice
    SNMP OID1.3.6.1.4.1.2636.3.39.1.7.1.1.4.1.5
    ExpressionNULL
    DescriptionPorts utilization when using Source-Nat Pool with PAT. [OIDs: 1.3.6.1.4.1.2636.3.39.1.7.1.1.4.1.1, 1.3.6.1.4.1.2636.3.39.1.7.1.1.4.1.5]
    CategorySNMP monitors
    Collector TypeGateway
    Monitor NameJuniper SRX Source-Nat Pool Ports Usage
    UnitNone

    Possible Inputs

    Possible Inputs
    MetricInput ValueRange of Values
    Frequency151 – 1440 (mins)
    FilterNULLNot Applicable
    Warning Operator
    Warning Threshold
    Warning Repeat Count
    Critical Operator
    Critical Threshold
    Critical Repeat Count
    AlertNoYes/No
    Graph (Yes/No)YesYes/No

    Sample Output

    No graph